I have it done on the left passenger door,it was miss aligned a bit.
Pry the plastic cover on the driver's side pillar.The latch "pin" is held by 2 torx(I think 2 ) bolts.Loosen them a bit so you can slide it towards interior,tighten them up.Try closing the door.If the objective is reached,no further steps are required.But,don't slide it a lot from the first time.I also scratched the paint around the base in its original position,slightly,so it gives a position alteration feedback.
That's it.
Quote:
Originally Posted by dinan e39
The new car has a slightly loose front drivers door. The other 3 have that solid thud when they are closed. Other than replacing the rubber door surround, is there any way to adjust the latch so it pulls the door in ever so slightly? TIA for the help.
|