Quote:
Originally Posted by finagle69
Actually, my amplifier has a HI/LO converter built-in. There is a switch on the rear of it to select the input source as HI or LOW.
For most other amps, you would need to install a converter.
|
Thanks for the write up. I actually have the exact same JL amp and sub, and also an '08 with premium sound and third row. I can't see in your pics and can't tell from the diagram exactly which wires to tap on the harness coming off the factory amp for the high level inputs.
1) Any way to describe them by color code?
2) Are these wires the amplified signal that goes to the factory "subs" underneath the front seats?
3) How did you remove the factory tray, is it held in by screws and did you just take a good look around and remove all you could find and then start pulling on the tray until it popped out?
I'm sure I'll have other questions, but glad you jumped into this!