Quote:
Originally Posted by michael i
Thank you for your quick reply I just hope that I have not damaged my eject box and cradle by trying the red and brown wires on the cigar lighter connectors. Perhaps when you have time you can let me know.
|
You should be ok mate, I had mine connected up in load of permutations trying to get it to work without the ILF.
I'm getting on a bit now myself mate.
Quote:
|
I will now start saveing up for a retro kit as I am sure you know you can no longer not get the wiring on it's own,
|
I didn't know that.
Quote:
|
so I unable to do what you have done by makeing up my own wiring like you have, unless you would like to make one for me and earn a few bob. I live in Cornwall.
|
I make the odd one up every now and again mate, PM me with your detail and what you want made up and I'll see what I have in my box of bits.
Quote:
|
Kind regards and thank you. michael i
|
You're welcome. (and welcome to the forums).
Quote:
Originally Posted by big bob
ccfj1 Is crade_on active high or low? I'm sure with a resistor or two it could be made to charge without a ULF.
|
Hi Bob, I've been thinking on this and I'm not 100% sure, I think it's high when the ignition is off and then when the ignition turns on it drops (I'm not sure if it just drops in voltage or it gets grounded.
I know when I was looking at getting it working (without the ULF), it didn't work as I thought it would, and it had some funny charging on/off issues (depending on how it was connected).