Hi John,
Thank you again for replying to me.
My car is a July 2004 X3 Sport without being prewired for Bluetooth.
What I hope is that you are able to make up the wiring kit for it. I have purchased a Eject Box and Cradle for the center console, at present have Bluetooth via a Nokia CK7W kit and the phone used by me is a Nokia 6310i which I will not replace.
BMW Retrofit kit for the car is 84 64 0 306 854.
Eject Box fitted is 84 64 0 306 855 and into that is Cradle 84 21 6 930 108 for the Nokia 6310i.
What I hope you will be able to do is make up the wiring loom, if it is of help I do have the BMW installation instructions for fitting which also includes the wiring digram with all the connections if it would be of help. I am not able to email them because I can't do things like that so will post it to you if you will give me your address. (PS I did send this email direct to you but hotmail returned it.)
As I said to you yesterday the eject box has a 18pin connector (round male pins) with 1 Green Pairing 2 Brown Neg 13 White cradle on and 5 Red 12 volt supply. As you know this information I found on the Xoutpost site.
I do not mind if you use second hand parts to fit it may also may be better for you to supply every thing at least you would then be able to test every thing before posting it to me. The main item is the harness made up.
Let me know what you wish to do and if you are able to help.
Kind regards Michael.