Quote:
Originally Posted by rogerkiu
Unless you are using DIS v4x (v47 if my memory is correct), any version newer than v47 is not able to code modules. I strongly recommed using the latest DIS or SSS (DIS v57 and SSS v41) to diagnose or code your BMW cars to avoid any software conflict. I never use DIS to code modules, only use SSS. According to BMW's instruction, always use the latest software to code/encode/upgrade modules, otherwise you may encounter problems and result in failure, so that the module may become unusable any more.
|
I use DIS v43 native. IIRC, any DIS version 44 and lower can program/code.
I have a higer version of DIS where its diagnose only and you program/code using SSS. However, it runs through vmware and I don't like it because its finicky and slow.
Also, I've never actually tried to get the yellow diagnostic head to work/connect with SSS. I do know others have. I just personally have not tried or have experience using SSS with it.
SlickGT1, sorry but I can't help you out on the EWS. However, the capability is there with what you have.