Quote:
Originally Posted by Big "J"
You certainly can! Just remove the thrust arm and get the bushing pressed out /in. It's a convenience factor for most as some (at least I do) here have a second set to use for a handy replacement with little to no down time.
Good Luck!!
|
Thanks for the reply just to get this straight in myjack up vehicle, take wheel off, undo bolts get old bushing pressed out and get new one pressed in, re attach thrust arm and tighten to specified torque as car is jacked up or does the car have to go back down to eartha and bolts tightened whilst car is exerting pressure?