Got the Relay (not a solid-state one) and i can't seem to get it to work.
This is the Relay diagram
Pin lay out
Screen still flicking ...
What i had was ...'
30 = Constant 12V
87 = Vehicle Chassis
85 = Reverse light +12
86 = Trigger wire
Screen still flickering so i changed 85/86 around the still the same thing.
Then i look at this Backup Cam
Most others use the Bosch Mini Relay but i suspect there is nothing wrong with the one that i have BUT what i noticed is that they all DON"T need a good 12+ to the relay and even use the 12+ from the Reverse Light (???), isn't this suppose to produce Pulse Signals?