I've done it. I've even used a drill to drill out 6, half inch thick bolts. It took forever. I then enlarged the holes, the got a crazy tap to go one Id over, and had to get custom bolts made because I couldn't find exact ones I needed. I still have a box of 94 if anyone needs em. Lol. This was on a subframe. I had a dipshit idiot friend help me on a project. Dumbass used a breaker bar, with a floor jack handle (4 feet long) and spun all my subframe bolts the wrong effin way. I almost killed him. I mean how much of a dumbass are you to not only spin one the wrong way, but proceed to do another 5.

I've drilled a bigger hole in a head at home, but I have a drill press. I wouldn't do hand drill thing on the head. But I used a drill bit. You just need to remember, that drilling metal, you go slow, and need good bits.

__________________
2006 4.8is, Black on White. SOLD Sniff Sniff.

2017 F85 x5m, Black on Red. BEAST MODE


"The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain

Unlock OBC post 5