I went nuts on my friend. I even asked him what he was thinking. He said they felt tight. And I was sitting at a grinder during that time, and heard the bolts screaming, eeeeeeeaaaaaaaarghhhhhhhhhhhhh. I even thought, damn, they must be rusted shut or something. Nope, they were getting tightened till their heads spun. And the heads stayed on the bolt till I got under to take a look. I touched it with my hand, and they start falling off. I blew a gasket. I really lost it. It took a lot of self control from kicking his ass. And after $100 or so in tap, and bolts, he never even offered to at least chip in for screwing this up.

I've built a jig out of 2x4 to hold my drill press, without the base, over the block. In the end, it would have been easier to take out the engine. But I only needed to do one hole, so it worked, but was a bihotch and a half to do all the adjustments. Maybe 5 hours worth. Not doing that again. I was young, and stupid.

I've built some crazy contraptions out of wood. I always make sure to have a bunch of wood material in the garage. You just never know when you need to Make another pair of hands.

__________________
2006 4.8is, Black on White. SOLD Sniff Sniff.

2017 F85 x5m, Black on Red. BEAST MODE


"The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain

Unlock OBC post 5