Quote:
Originally Posted by Cisc0
The pic of the bolt severely bottomed out happens to be my 25MM DRA spacers and this was NOT caused by not trimming down the 1/16". That was cause by over torquing and using an air impact gun to apply the bolts, as the instruction states, they need to be hand torqued. I had the spacers on my X for almost 2 years taking the wheels off myself during winter season to swap out. This happened to be the one time that I needed to replace my rear disk brakes/pads and I was too lazy to do myself. Took to an indie and viola. 3 of the OE bolts snapped off inside the spacer causing me to trash them because there is no coming back from that. Now I choose to ride without them.
|
Bumped the thread where the other member had the long bolt issue, sorry to have posted the pic of your issue.
DTMdan, get your facts straight, posted a number of times in this 2nd most recent spacer thread without a SINGLE pic of my truck on spacers.