Originally Posted by pnoyako85

i dont know how to explain it..but here is a pic.....ill talk to Panda...and he'll better explain it..

on the pic....i made basically holes on the bumper since i didnt want to silicone it........what i did is ...

-Do this instructions first without making hole onyour bumper.....when your ready to make holes....line it up................
THE Toggle piece will be tight to fit in the bumper trim but just make a nice hole and make space for toggle to fit at the back of the bumper trim.....once you get it...lined up..attach the toggle onto the screw then lock it with a 5/16 hex head and pull the flares towards the trim.....you'll need DREMEL and SCrew Gun to do this...




Taggle Bolt 1/4x3inch

small copper color metal rod
.39c screw with a hex bolt (5/16th head) on the end tip

- measure the end flare and and cut the rod to fit inside the flares when you put the metal rod inside the flares..make sure its nice and snug as you will be pulling your flares from the rod.....
....on the pic ( white paper).....you see how i draw the Rod+screw+ toggle piece and the hex to pull the toggle along with the flares to secure it...

You'll have to cut all those little pieces that sticks out from the flares....



THEN
i hope you can understand the pic i drew..
PS...on the Toggle BOlt Box..how i put the pieces is how you put it on the flares...