Quote:
Originally Posted by Professor
Ok so I just want to rotate the worn part from its current position by 180 degrees. Should be simple enough but I'm still unsure of how to do this without taking off the metal cover like in the video
|
Ok follow this exactly.
1. Unbolt actuator from X case.
2. Take off the little ground wire, and the main harness.
3. The actuator is in your hand with the motor still attached.
4. Mark said white gear on the outside, extend the line to the metal plate
5. Mark one side of your gear with a plus, that way you will know you didn't put it back in the original position.
6. Take out the 4 screws that hold motor to the actuator.
7. Remove motor just like in the vid. Hold onto that harness connection, or you will be putting the brushes back in one at a time. It's not the end of the world, I took my motor apart just to see.
8. Once the motor is out, the white gear spins freely. You can now spin it till you are blue in the face.
9. Line up the marks, and assemble.
You are done.
__________________
2006 4.8is, Black on White. SOLD Sniff Sniff.
2017 F85 x5m, Black on Red. BEAST MODE
"The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain
Unlock OBC post 5