Quote:
Originally Posted by mrathell
The only codes I pull from the ODB II are the misfire codes, the Indy shop was able to retrieve all of the other codes.
I will check the ground as you suggested. Thank you.im assuming you mean the braided ground and not the brown one coming from the wire harness that bolt to the same post as the braided ground.
|
I would check the stud they bolt to....I was wrong to suggest the wires themselves. While those could be a problem potentially, they are not that easy to check. (You'd have to get a wiring diagram and figure out where they go, then check at both ends). While it seems obvious that a stud mounted in the engine would be a good ground, that requires the main ground straps on the engine to be good. It is critical that the coil packs have good ground.