Quote:
Originally Posted by SlickGT1
If you remove the exhaust from the hanger, drop it down some, and use an angle ratchet to remove the two screws, would it still not work.
|
Possibly
It is an extremely long screw though. From the bottom of the bracket (#3 on diagram:
http://www.realoem.com/bmw/diagrams/w/m/82.png) to the top of the Ractive tip, the screw only came down about 2 inches. I'll see if I can take some pics after work to explain it better, it is confusing without seeing it.
For reference, this is without trimming anything off the Ractive tip - tip sitting flush against muffler.
--
I also don't know how guys were able to weld the tips on without dropping the exhaust or removing the bumper, there's barely any room in there.