Make a blank FSW_PSW.MAN file first in the work directory. Not having this was screwing my system up. it's the same name as the .Trc file but instead of .Trc you make it .man.

Open inpa first, if it works so will NCS.
Close inpa, open NCS.
Load profile, I use Revlovs
Press F1, right away press F3, choose e53, choose ews, press ok. Your vin should come up. Well not full vin, only last 8 matter, the 8th of the last 8 is a check digit, so ignore that one. Then press back. Press process ecu, choose Gm3, ok, ok.

Then you need to change jobs and select codierdaten_lessen, this makes NCS read your module. Press execute job. When done it will say coding finished, and you have FSW_PSW.TRC file with all your code.

That's where I'm up to so far.

I only have about three hours of free time invested in this. So let me know where you get up to.

__________________
2006 4.8is, Black on White. SOLD Sniff Sniff.

2017 F85 x5m, Black on Red. BEAST MODE


"The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain

Unlock OBC post 5