Quote:
Originally Posted by SlickGT1
Make a blank FSW_PSW.MAN file first in the work directory. Not having this was screwing my system up. it's the same name as the .Trc file but instead of .Trc you make it .man.
Open inpa first, if it works so will NCS.
Close inpa, open NCS.
Load profile, I use Revlovs
Press F1, right away press F3, choose e53, choose ews, press ok. Your vin should come up. Well not full vin, only last 8 matter, the 8th of the last 8 is a check digit, so ignore that one. Then press back. Press process ecu, choose Gm3, ok, ok.
Then you need to change jobs and select codierdaten_lessen, this makes NCS read your module. Press execute job. When done it will say coding finished, and you have FSW_PSW.TRC file with all your code.
That's where I'm up to so far.
I only have about three hours of free time invested in this. So let me know where you get up to.
|
After you chose GM3, and press f4 again, a txt will open with bunch of HEX in it. Close that, and go to your WORK folder and open the .TRC file. Save it as a .MAN file, and change w/e you need. Save it again as a .MAN file.. then you F5, coapiReadSgGetFSWPSW, F2, SG_CODIEREN, and hit F3 to start coding. It will say coding ended after its finished.