Xoutpost.com - View Single Post

jgold47 · #**169** 12-12-2012, 04:50 PM

you could try this code:

TAGFAHRLICHT_ECE : Daytime running lights(ECE)[angle eyes]

to aktiv

Try playing with these two

BLK_V_GED_ALS_SIDEMARK - this controls the functions of the side markers, but may turn everything off.
aktiv
BLK_V_GEDIMMT_ALS_ERSATZ
aktiv
BL_ALS_SL_DIMMEN - this should mabye turn off your brake lights as parking lights
aktiv

you could also turn on your high beams as DRL which is the normal

GED_FL_ALS_DRL

but then turn the intensity all the way down.
using

FL_DIMMUNG_ALS_DRL
wert_06

The problem is I cant figure out what wert_06 means (_01-05 I can find). FL_DIMMUNG_ALS_DRL :wert_01 = 0 % wert_02 = 18,82 % wert_03 = 20,39 % wert_04 = 43,92 %wert_05 = 18,82 % setting intensity of high beams for daytime running light

so maybe try wert_01 and see if the tagfarlict works for you.

I sort of had this set up yesterday and it didnt work, but I was having problems with the ALS turning on and that may have disrupted the normal DRL function.

Dennis -

SL_INNEN_ALS_TWL : parking light
SL_VORNE_ALS_ZUSATZ_BLK : front parking light as additional turn light

Both are set to nicht.

could be what we are looking for.

the problem is the stupid nomenclature keeps changing between the lights. One minute they are side markers, then parking lights, then SL (standlict), but then there are three distinct sets of SL's, SL_LH, SL_LHI and SL_LV (and then rights), which I guess is Stand licht (rear?), stand licht inner (rear) and standlicht (front) that can be hot and cold monitored. I guess we could isolate the code by pulling the bulb hot and seeing if hot monitoring picks it up. then start coding off hot monitoring till it goes away.

Sponsored Links

Sponsored Links