Quote:
|
Cool, are you getting license plate light out errors with those festoon bulbs? If not, where did you get them?
|
Thanks man. No Errors. I coded the LCM for Check Control and Cold monitoring off on the lic. plate circuit.
Quote:
Originally Posted by SlickGT1
Looks good. If you get SMD bulbs for exterior lights, it shouldn't cause errors, but they will flicker at startup. To kill the startup flicker, you need to do some coding.
Lexicon, did you notice yours flicker at night at startup? Mine did till I coded off the cold monitoring. Same for the driver side angel eyes. It actually abused my driver side AE to the point I had to send it out for replacement. Glad Umnitza has lifetime waranty.
Oh, interior lights are not monitored at all, so no need for interior SMD LEDs, any led that fit will do.
|
Hi Slick, No Flicker for me man. I remembered your warning about your A.E. Bulb turning green or failing because of the cold monitoring on the LCM for that circuit. I used my homemade ibus interface and coded the LCM with a program called Navcoder. It's a nice little piece of software I have used for years to code navi units/ radios/TV modules ect. On my E38 & E39 It also has LCM support and adjustments for DRL, Follow Me Home Settings, Double Blink Euro Flashers, GPS Clock Sync. Ect.
I was going to do a thread on it this evening actually. Thanks again for the reminder. Those A.E. LED's did strobe quite a bit in key pos. 2 prior to start up before I coded the Cold monitoring off.
-Lex