View Single Post
  #7  
Old 01-01-2013, 12:08 PM
OlyS4 OlyS4 is offline
Member
 
Join Date: Aug 2011
Location: Oympia, WA
Posts: 61
OlyS4 is on a distinguished road
Quote:
Originally Posted by JCL View Post
I think it is just like changing the oil in any other BMW.

Don't get under a vehicle that isn't properly supported. Jacks don't count. Jackstands or appropriate ramps do.

Use good synthetic oil, 5w-30. I usually used OE BMW, as it wasn't expensive.

Use only an OE filter, from the dealer.

Replace all plug gaskets, o-rings, etc.

Drain the oil warm, not hot.

Filling is a bit of a hassle if you don't have a dipstick. Not sure if your model has one or not. My 535 didn't.

I think the lack of DIY posts is because most of these vehicles are still under the included maintenance program, and people have come to realize over the past few years that if you run it no longer than the service lights call for, your engine won't fail prematurely. There are far fewer people doing intermediate oil changes than there were on early E53s, for example. My 535 and X3 both ran great using the BMW service recommendations. I ran the X3 to 24,000 km instead of the 28,000 km the lights called for, and changed the oil early, but that is because I am keeping it for awhile.

Here is the only thread I found in a quick search:

http://www.xoutpost.com/bmw-sav-foru...-diys-e70.html
Thank you. I changed the oil regularly in our E53 3.0 and it was a breeze, just hearing that you have to drain the filter in the E70, etc, and would like clarification on where the access panels are for the oil drain plug.

Happy New Year!
Reply With Quote

Sponsored Links