Quote:
Originally Posted by killcrap
Because of the way the 6HP26X fill plug is designed, it is difficult to fill it. I recommend the following tool to fill all BMW transmissions.
Private Brand Tools (PBT70910) Air Ratchet Pump
You can use an electric drill, or impact to operate this pump.
Start car cold, remove fill plug, fill with transmission fluid until it starts to come out. Re-install plug, and tighten.
|
I thought puttin the oil cool was a good idea. But when I tried that it was dripping oil out. So I can't even get the same amount of oil I got in when I changed the oil.
Any more ideas. Can I tried putting the oil in through the oil cooler line. Any one have any thoughts on this or have done it before. Thanks