Quote:
Originally Posted by Xtony
The WDS shows it with the fuses under the glovebox, but it's not very clear. I checked all of the fuses there, and they were fine. I'm going to go ahead and swap the sensor today.
|
Wait- there should be a power and ground to the sensor that powers the heater circuit- and a separate pair for the sensor itself. (4 wires) You should figure out which two are the heater, and pop a voltmeter onto the connector to see if it is being powered- if not, then you know the sensor wont fix it.
Then again, a new O2 sensor is always nice to have!
GL
A