Quote:
Originally Posted by TerminatorX5
BM53 withWidescreenMonitor AFTER 9/01
1. Turn the radio on.
Immediately press and hold the 'Select' button for at least 8 seconds. The screen will switch to Service
Mode.
2.
3. The screen will now show the serial number of the radio.
4. Use the "< >" buttons to select the desired service function.
5. Selections for the desired service function can be made by using the radio station preset buttons #1-6.
6. Turn the radio off to leave the service mode.
NOTE:
When selecting the country AREA, push the station preset #1 repeatedly until AREA USA is shown on the
screen.
When selecting the GAL level, use station presets #1-6 to select level.
To turn off/on the RDS function on this radio, push the 'INFO' button and select RDS off/on.
|
Your The Man Term!
The Link JCL provided was for older radios and I couldn't get it into the service menu. I used your updated info for my newer Gen. Radio using the Select button and it worked perfectly. I lowered the GAL from it's inital setting @ 5 down to 1 and did a sport mode test drive
It worked like a charm I can't hear the volume increasing at all anymore.... Now I can start pulling my interior and run some 1/0GA
Thanks a million kind sir!