we were hoping to get the part number of the connector that is integral part of the module - those connectors are available as a standalone units (check the 12-pin trailer connector that is taped off on the rear wall of the trunk, next to the hole opening for the trailer harness), but it seems to be a very hard endeaviour to source them... removing the pins and direct wire them should work for people whoi already have the trailer module (thus hav ing each individual rear fog fed and monitored by the LCM directly, as opposed to splitting pin 3 of the trailer module), and for those folks who do not have trailer module and have no plans for the trailer module - they will get the rear fog functionality without spending an arm and leg for the tow hitch... those, who have the tow hitch and where the rear fogs are standard - they careless about this retrofit...

I am going to source the 2-pin connector for the application and will let you guys know...