Quote:
Originally Posted by chrissoto312
LOL, No, I don't have the washer nozzles on my model.
I can access the back of my headlight easily. I know how after replacing the factory HID's back when I first bought it.
|
You probably have more room than a cramped 4.8is engine bay so if you can either drop the bumper and remove the headlights (should be screws/bolts at the bottom of the bumper connecting to the skid plate, and about 4 screws on each side fender liner near the bottom, as well as some screws near the middle of the bumper/license plate area.
Again i am not familiar with removing the facelift bumper, on my pre-facelift i had a total of 19 fasteners on the bumper, plus 4 bolts on each headlight to remove.
if you can remove the backs of the headlights and see the internals, i would recommend someone sitting in the car and doing the tests you were trying earlier and see if you hear any stripped teeth of a gear or any unusual noises coming from the right headlight that is in question.