Quote:
Originally Posted by TwinsPoppa
Not sure on that last one. Regardless, if you mess up you can always retry as many times you want. LOL
Or if this doesn't work for you, you can try and manually adjust each corner to your liking.
I think later on I found that there was an article/DIY already on this on the forum. Let me see if I can find that and you can compare DIYs.
|
Well when the module was last programmed I'm pretty sure the values were set to 18" wheels and sport suspension since I got the staggered 20s after I bought the car, here is the values that have been posted on the forum:
_______________ 17"____18"____19"____20"___these are wheel sizes
front axle_______685____697____710____722
rear axle________687____699____712____724
sport fr_________670____682____695____707
sport rr_________672____684____697____709
So looking at the chart, my current programmed values should be 682 and 684 for an 18" wheel, if I go into the calibration and select 20" wheel diameter and then plug in the correct value or 707 front and 709 rear, theoretically the ride height should not change as the 18" height value compensates for the different size wheels?
I'm just looking for the benchmark and to program the proper default height for my 20" wheels for starters.
Then as far as lowering 10mm or so, I would just add 10mm to the correct 20" sport values to give me 717 and 719 mm, or if lowering 15mm I would program 722 and 724, and if I do revert back to default setting just program 707 and 709 mm again?
NINJA EDIT: Now I understand what you mean with having the proper values to start with. If I want to start from scratch what is the operation to be sure I am starting with default values of 707 and 709 mm? Is there a separate ride height default setting that I can access?
Then once I am sure the proper values are plugged in for 20" wheels I totally understand how the system works as far as raising/lowering based on your description