Quote:
Originally Posted by deanblue9
Recently, I am having some issues with clunking from the the left from. So after much research and reading posts on this board I purchased to sway link bars and replaced both fronts. However, i am still having this clunking noise from the left front whenever I go over bump at low speed. Where do I go from here.
|
Dean if your thrust arms are original I'd look into getting those looked at, the arms should be tight with no play, if they are worn they will have play and flex in the bushing area.
You can either have just the bushings replaced or replace the whole arm as I did, I also replaced the ball joints on the arm too.