BINGO!!!


change the NSL_AH_US_OPTION - rear fog lights (USA) from aktiv to nicht_activ

I got 12V (12.34VDC) on pins 10 and 12...

nothing else was changed, the pin 3 still has 14.32 VDC...


i wasn't using the revtor profile in NCS, alll should be good now...

EDIT: it was getting late, and i did not pull the trailer module off to see if the pins 10 and 12 still had the voltage - i will do it once i have a chance...
Jay, at this point if you manage to change that line in programming, you should be all set for the rear fogs - do you have means to make the change?