Bcred- Thanks, means alot coming from someone with legit carbon fiber interior! ::

starbiker- Thanks! By virtue of install and MID relocation, it was an intense job. The video took a bit too but I felt that it made go each hour of my hard work go further. Here is the info that you were looking for:



VINYL WRAP: 3M Scotchprint Car Wrap Vinyl Film 1080 Series Matte Dark Gray M261 60"x24" (10 Sq/ft)

VENDER: metrorestyling (highly recommended because below...)

PURCHASE NOTES: I went w/ dark gray after ordering about 30 splotches LOL. Metrorestyling can be found on Amazon and the web. On the web, you can order samples of the 3M line and they offer the most complete collection of samples and rolls that I found. (Nothing is more annoying than having to split up sample order among different venders!)

INSTALL NOTES: Generally easy as long as you have patience. Make sure you have a trim removal kit. I recommend using a heatgun for center console and saving that for last. The contour and thruputs in center console are much more difficult to manage. With that said it can be done but I cheated by splitting that piece up. Three strips actually make up my center console. I really did this because I ran low on wrap and could not wait for more to finish the job.

Let me know if you have any more questions; thanks for interest!