Quote:
Originally Posted by ake53
anyone see a diy w/pics on this?
couldnt find it in tis.
one side is just a bolt and nut.
the other side going to the spindle is attached to ball joint?
how do you remove other side (towards spindle) without replacing ball joint?
thanks!
|
Alex are you doing the arms or just the bushings?
If you are doing just the bushings you will need a ball joint separator and an E14 socket for the bolts on the spindle.
If you are doing the complete arms I would spend the 50 bucks, get 2 fresh ball joints, get an E14 socket and a BFH and whack that fucker out of the spindle.