Quote:
|
Originally Posted by luvmy03E53
Quote:
|
Originally Posted by Ricky Bobby
Quote:
|
Originally Posted by luvmy03E53
Has anyone found how to get to the settings for lane change blinking? ... can't find it anywhere in my GM3 or even LCM. Am I just out of luck?
|
not an available option in our LCM
|
I've had to accept that fact, so I've spent the last 2 days programming the middle finger of my left hand to do the same job. Still has a few glitches, but I may have it debugged by the weekend...
|
Our generation BMWs do have a lane change feature on our turn indicators...but instead of the "press & release" activation like on the new generation (MOST BUS) BMWs...ours is the decades old gentle "press & hold" of the turn indicator. If you press & hold the turn indicator instead of pushing it all the way into the detent (for a dedicated turn) the blinkers will flash as long as the turn indicator is held...then you release the handle after changing lanes and the flashing stops.
Again, don't press/push the turn indicator past the detent that keeps the indicators flashing while you release the handle. This is the lane change feature on our generation BMW.
(see "Signaling Briefly" in the pic from owners manual below)
