Quote:
Originally Posted by TerminatorX5
you have to change the connectors, or make a changeover harness from OE parts - neither is hard but you need to be at least 2 on the 1-10 scale of technical ability... you get the parts for the recepticle plug that will plug into the car's harness, and then you will get the plug housing that will plug into the projector lights.. I think RickyBobby came up with the harness - i just snipped off the original plugs and fitted the projector plugs i got from the dealer... all the part numbers are in their respective threads...
you have to be mindful of the airduct on the passenger side - do as TMV did, just wiggle it out of way...
 |
Yes I came up with a pigtail so I didn't snip my factory wiring, you will need this, to make an H11 male to BMW female 2 pin connection:
2X H8 H9 H10 H11 880 Male Connectors Connector HID Plug Free Shipping from USA | eBay
2 of these from the dealer (connection)
Home Page > Search > 61 13 8 373 332 > ES#165762 Socket Housing - Priced Each - 61138373332
4 of these from the dealer (wire lead with pre-crimped pin, 2 go in each connector and you put the male H11 on the other end):
Home Page > Search > 61 13 0 007 256 > ES#2550154 Bushing Contact With Wire Lead - Pack Of 10 - 61130007256