Did you replace the filter as well? ATF needs to be filled in between 35C-55C, IIRC. Warm up engine is too vague for that. I did it on the old 3.0 following GT1/DIS procedure. Car needs to be leveled.
1. Fill the pan until ATF drip out.
2. Close fill-plug temporarily.
3. Start engine and run through each gears, with a few second in each.
4. Measure the ATF temp.
5. Open fill-plug and pump more ATF in (when it's in correct temp range)
6. When it drip out, let it does so for at least 60 sec.
7. Close fill-plug.
8. Turn off engine.

You might not have the correct amount of ATF in there if you didn't fill it at the correct temp. More or less than correct amount is NOT good.

__________________

00 E39 DINAN S1 //M5 (82k miles)
06 E53 DINAN 4.8iS, born 2/18/2006 (126k miles) http://www.xoutpost.com/bmw-sav-foru...s-my-dslr.html
90 Straman Z32 TwinTurbo Convertible, (1 of 44 ever made) 5 speed, 444rwhp/451rwtq
01 360 Novitec Spider F1 (26k miles)