Quote:
Originally Posted by taosx5
...On another note, do you have any ideas on the 4.6 that runs staggered wheels? If I put these E-70 wheels on it, would I need spacers on the rears to get them a little off set from the fronts, you know more centered in the wheel well which is bigger? Thanks!
|
Using spacers can accomplish what you're saying...they can push the wheel outward so that the wheel can be closer to the fender...or even beyond it (depending on what size spacer/adapter you use).
And if you get adapter to push the wheel outward...you might be able to find some that will take care of the hub difference too (72.6mm on the hub side...74.1mm on the other side that will take care of the 74.1mm center bore of the e70 wheel).
Good luck. Hopefully some of the forum members that are running spacers/adapters can chime in on what size works best. But until then, to mount the e70 wheels...the hubcentric rings will get you by.
