Quote:
Originally Posted by Davidf
The routing of the trailer wiring harness is incorrect in the above picture. The harness should loop UNDER the sheetmetal to the left of the exhaust tip. Basically all the wiring in the clear tubing should be behind (actually in front) of the sheet metal. There are studs on the front side to hold the harness.
|
I double checked (bumper was still off, didn't finish the job yet ... life gets in the way): makes sense what you are saying, but the "integral body studs" on my car are on the side of the trailer hitch assembly ... no studs on the "front side" of the sheet metal ...