I'm in the process of installing a Pioneer AppRadio3 and have a couple of questions about which wires to tap for steering wheel control (I'm using an Axxess ASWC-1) and reverse signal for the backup cam.
The Axxess instructions show the following:
That looks strikingly similar to this connector that connects to the factory stereo:
Pin 9 has this wire connected to it, which is White/
Grey/Yellow, as opposed to White/
Red/Yellow.
Can anyone confirm that is the correct wire to tap for the audio steering wheel control signals?
For the reverse/backup signal, I understand that pin3 on connector 1599 has this signal. This comes off a connector right next to the gear shift knob. It is blue with a grey stripe.
I'm pretty much past the point of no return at this point.
These are the amps going in:
I'm using the Janus double din bezel & mount:
