Quote:
Originally Posted by CrazyOneToo
Sorry for the misunderstanding. What I mean is,
when I am out side of the test viewer and in normal mode
(car started) I can only see the "Cons1 22.3 L/100" displayed
and then back to a blank screen when I push the turn signal button again.
I assume that I locked one of the options to allow me to only view that one readout.
Alan
|
Alan, you've gotta help us to help you better. First, there are 2 instrument cluster set-ups (high or low) and either a MID (multi-informational display), or the navigation monitor.
Which set-up do you have? You've gotta remember that we can not "SEE" what you have...we rely on you telling/explaining what you have or your situation. Your first post was really vague...we had no clue as to "what you tried" and "what you locked". The words you used as your subject "
this" & "
mine" gave no indication of what you were referring to.
And the post above yours were discussing issues with their adaptive headlights.
If you have the high instrument cluster that has the 20 digit alpha/numeric display...you can program any or all of the OBC features to appear in that display. Also not sure if you actually want liters instead of gallons...but you can also change the unit of measure.'
But please give us more details as to which instrument cluster you have or if you have the MID or Nav monitor...the instructions for programming the high instrument cluster is similar but slightly different. If you have the low instrument cluster...then you may have a totally different issue. But again, we can't give you specific info until you reveal what you have.
This is a MID:
High Instrument Cluster
Instructions for programming the OBC features into the display on the High Cluster
