|
this is so easy, like taking a candy from a baby!!! lol...
if you want to do it yourself, go to ebay, order cable and software from a dude in romania (he had made a killing off this forum!!!)... once you have the hardware and the software, then it is time to program
program the low beam for DLR - the low beams will come on every single time the engine is running, regardless of the switch position... if you have xenons, the intensity is standard, if you have halogens, you should be able to modulate the output from 5% to 100% of the light intensity...
about the highbeams, there is another line in the programming that will allow you to have both, the low beam in bi action (i suspect, that you have xenons, therefore, bi-xenon) and the high beams (when using stalk to flash-to-pass, only the real highbeams come on, when pushing away, all four are shining highbeam), and you also can program the lower light, the fogs, to stay on regardless of the highbeam (in the US it is required to extinguish the fogs when highbeams are engaged)... so, you should be able to have all 6 front lights shining at the same time...
let us know when you are ready to do the programming, we will get you the lines...
|