Quote:
Originally Posted by Ricky Bobby
You need the error cancellers DDM sells, or any other vendor on ebay to plug these in line with the stock harness. The error cancellers keep from seeing errors on the dash and regulate the voltage so that your LCM isn't freaking out with the startup voltage of the ballasts.
The projector fogs do fit on the facelift, if you see the black connector that is an H11 adapter which will plug into your stock harness. The actual bulbs in the Depo projectors are H3, however.
Not sure if these are 35w or 55w ballasts, however if they are 55w ballasts I HIGHLY recommend adding a relay harness + error cancellers because that is a pretty big draw on the electrical circuit.
|
I know this is already OT for Ducati's thread - but yes my HID kit is from DDM tuning too. Bulbs, harness, error cancellors, ballast. So until I can get someone close enough to code them for me, I thought it best to remove them from the X and prevent errors (I know its weird I get the SUSP LEVEL error but it fires up the error EVERY SINGLE TIME I power up the HID fogs)