Ah what the heck, I had some free time on Saturday, so I did it. The bracket that is below the headlights is a major pain in the ass to remove and put back in. Otherwise, you need a plastic rivet tool, an 8mm and 10mm socket and some torx heads for the removal and install.
Big thanks to Okee (
[email protected]) for the guidance with WINKFP. I had it setup, but I had to write the vin to the new FRM3, and I hadn't used it a lot before. After writing the vin to the FRM3, use NCSExpert to write the FA to the FRM3 using the expert profile (FA Write is the job). The I used SG Coderein to default the new FRM using the expert profile. Then use a profile that allows manipulation to modify the date to #0411 and code the FRM3, and also to code things like fog lights on with high beams, double blink, etc