The harness f your application will be similar to the harness that was built here (http://www.xoutpost.com/961741-post33.html) but the end with the factory pins and terminal will be different. instead of the male pins used in the link above, you will need to use female pins, and if your factory radio is missing the black 12-pin plug inside the big square plug on the radio, then you will need to get that black plug too... chances are that your radio has the black plug in there already and all you will need, just the three female pins... Those female pins are Digi-Key part # A28327-ND, and the factory part is 61130006663 with 1 foot brown wire already pre-crimped...

read the info in the link, and let me know if you think you can do it, and if you need further guidance - i do not wish to patronize you if you are fully capable nor do i wish to leave you hanging if you have any questions...