Quote:
Originally Posted by mam4.6
I'm hoping to try a bake-job myself, maybe installing LED's eventually, this summer sometime. I don't know how the insides look, projectors, fasteners, etc. How do the projectors fasten inside? Is there any chance of them rotating just a hair. The cut-off on the driver's side seems to be just a bit off, doesn't quite line up with passengers side. I thot maybe I just need to adjust my headlight a bit, but I can't go quite far enough to correct it.
|
They attach with four nuts that thread on to studs, there are 4 rubber "spacer washers" between the projector and the studs as well, which can give some play in mounting the projector.
If you're certain the mounting of the headlight itself is not causing any issues (the 4 bolts in the frame rail), if you had the lights open to install AE's, you could play with the rubber spacers by tightening or loosening the adjustments on the 4 nuts, to give some axial or radial play. There is not much, but its there. To be fair I tried my best to line them up with my reference line in the basement, but any slight movement of each headlight when testing could have skewed a degree. Always best to aim the headlights with the lenses off, and them mounted on the car, but I didn't have that option.
PM me if you need anything Matt!