Hi,
Just a quick update and 'all-play' question for anyone following this thread....

I managed to get Navcoder to code the ULF, or at least it reported that it had. Only thing is that the VR button still doesn't respond I think, or I hope, I know why.

At the moment the MK4 Nav unit is away being repaired so there's no Nav installed in the car. I imagine that that's why when I tick the (enable VR) box, the Language drop-down is greyed out.

Now in theory, the VR shouldn't need the MK4 installed. After all, many of the VR commands are not NAV related, but does it sound plausible that the option only works with the NAV option installed? Does it grab the voices from the Nav 1.32 software, or MK4 flash RAM?

After the code-telephone option completes Navcoder asks for the ignition to be turned off for 15 seconds, but then after the wait, the button is still unresponsive and I find the VR 'unticked' when I open Navcoder again

The ULF is 2005 Gen 5 or 6, and has the MIT-SES stamped on the side so it should work? Without VR, the Telephone option from the Menu controls is a real pain to use unless you keep your phone.

Any suggestions guys (apart from wait till the MK4 is back in the car)? Thanks in advance.

Kev