Quote:
Originally Posted by white lancer
Seriously..... put the control arm back on loose and attack it with a 2lb hammer - I think you won't gain anything using a 10lb sledge - you wont get it in there for a start!
Have you tried a bit of heat?
|
White lancer, many thanks . . . I didn't think it was going to, but it worked.
I put the control arm back on - connected both ends so I didn't have to hold the other end while I was beating on the ball joint end. I used a 3 lb hammer and it took a fair number of whacks, but it finally let loose.
New ball joint and tie rod installed and I'm finished for the night. The other side should go much better. Thanks for all the input everyone.