Quote:
Originally Posted by m5james
Mine only came w/ rear air suspension, so I've still got airbags in the rear. There are little arms that connect to the control arms to little sensors that read when the truck is too low. A member here was going to help me w/ custom made smaller arms and some Romanian software that would allow the car to sit nice and low on the coilovers, but then I'd still have use of the airbags for things like towing, lots of girls in the backseat, etc  At this point I'm just going to leave the power to the pump disconnected, but I know I'm going to get an error message until I address it properly. |
Ah ok. If you are keeping the rear air suspension then the easiest thing to do is purchase the adjustable rear links that connect the sensor to the lower swing arm. There's a few websites now selling them as you can adjust the link then to trick the sensor into thinking the X is sat to high and thus the system will reduce the air in the rear and therefore drop the rear. This will still allow the rear to be self levelling. You may need to disconnect the fronts using this method and place the leveller to the correct point as the rear to make it think it is sat level.