finally got around to putting H3C HID bulbs in my projector fogs (going to aim them now in a few minutes). edit: decided against HID's and put 55w halogen bulbs back in just so I get both HID and halogen spectrums. I also must have a piss poor quality HID igniter/ballast because I've always had slight flickering in the bulbs and that drives me nuts.
fixed my folding mirrors problem by cutting off the drivers limit switch (had 2 frayed wires going into limit switch) and splicing on another used one bought from a board member.
fixed my PDC sensor error by putting a zap strap/zip tie tightly around the connector and sensor as for some reason there is not enough pressure/clamping force holding it in and therefore the PDC system thought I had a dead sensor.
edit: turns out the sensor is dead again
guess I'll need a new sensor