|
First, get a height based system or a system which utilizes both height & pressure....its going to be next to impossible to keep the vehicle level with a pressure based system alone. For show cars it works...but for a driver & changing loads it's really a half-ass'd approcah; IMO of course.
Secondly is that even if you could get a bag to compress down to 2" on the rear (which is more or less the height of the factory bag bottom seat),a geometry-wise i doubt it's going to work. It would require a slimmer tire and/or a wild offset, as going that low will touch the inside top side wall to the inner fender wall with the extreme camber that will undoubtedly result.
As far as UAS and their "250 psi safely", the pressure you need to run to achieve your desired ride height will be a function of the bag size vs vehicle weight. Burst pressure would be what I'd look at not max fill pressure as you're likely not going to need more than ~100lbs psi. I found mine to slow down around 85 psi, so are likely around the 70-75psi per bag mark. I'll know more specific numbers once I get my new setup up and running.
__________________
2004 X5 3.0i
Mod list: Currently Longer than the maximum allowed characters that can be typed here...
|