|
Axle grease is different than wheel bearing grease, but to be honest with you, I have used standard wheel bearing grease when I was in a pinch. Zero problems.
In fact, standard grease is probably OK as the ball bearings are very strong material, all they need is some lubrication.
The #1 cause of CV Joint failure is cracked rubber boot.
Since you leak a tiny of grease, the joint is probably still full of grease, just tighten the clamp a bit. Home Depot sells the crimping tool (in the garden water underground sprinkler section) for $10.
__________________
1998 E39 528i 5sp MT
2006 E53 X5 3.0 6sp MT
|