So I tried installing the IND painted front reflectors this weekend, note I have the ones with the cameras built in, and I couldn't do it. I removed the 3 bolts from the lower 1/3 part of the hub, the others around the top and back seemed to plastic rivets. I could not peel the hub liner back far enough to get into the inside of the fender. I didn't want to snap the fender flare and I feared that would happen. Do I have to take the wheel off and remove the hub liner to access the reflector? Also am I able to pop out the plastic rivets around the hub without damaging them to the point they won't go back in?