Since I got the -522 ULF installed in my X5, I was wondering how to transfer the phone book and I remember UCrew had this info....This was confirmed by another VERIZON Treo 650 user who retrofitted a -522 ULF in his E38 7-series. Use Verizon Treo 650 firmware 1.04 (the latest one).

Here is his post from Bimmerboard.com's bluetooth forum:

Subject: I can see my Verizon Treo 650 phone book on screen
Author: pietern740il : member since January, 2005 : 159 posts
Posted on: 2006-01-28 07:12:02


Here is what I did.

1) I held the pairing button for two second

2) While holding the pairing button, I turn key to position 1 for two more seconds, then I released the pairing button.
You should see Bluetooth Pairing on the screen

3) I held the pairing button for again for 10 second, to delete any paired devices. Once complete you will hear double tones, and the screen should paired devices deleted.

4) On the Treo 650, I went into the Bluetooth section and delete the BMW device. Then I went thru the steps to pair the phone with the car.
After I received the confirmation beep, to acknowledge phone was added.

5) On the Treo 650, I opened my contacts view. Using the drop down menu button on the Treo, I then selected "Send Category". The next screen I selected Bluetooth, next I checked BMW ULF and pressed "OK"
The list of contacts was sent very quickly.

At this point I was expecting the nav message to change, to confirm the contacts were received. But the screen continued to show "Bluetooth Pairing". So I waited for about 4 minutes, then turn the ignition off. I waited a few minutes, then started the car.

That was it.
Good Luck

I am using Bmw ULF 522, on the Treo OS, I am using V1.04.

__________________