Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > Articles > X5 > Miscellaneous - X5
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-29-2009, 11:42 AM
mrbmwx5's Avatar
Premier Member
 
Join Date: Jun 2006
Location: Brownstwn,Michigan.
Posts: 4,794
mrbmwx5 is on a distinguished road
Talking Replacing battery in key fob for an E53

1) Ok so here is my first "KEY DIY"attempt at a detailed also if you mess up your own key trying to do this don't yell at me!

So I have the 2 key fobs that came with my car when I bought it used. One I use everyday and the second one has had a dead battery since I got the car. When I called the dealership they wanted like $260.00 for a new one. I did a search around here and found you could get deals and what not and possibly get it down to around $90-120 bucks.. still way too much in my book since I already had a working key.

After talking to RICHIRICH who had taken apart a key fob . I decided what the hell the key was already dead anyways...

Here is the key before I tried anything..


2) I then proceeded to take a matt knife and xacto knife and basically carefully cut the key open along the seam where the top and bottom joined up.

3) Next I took a small chisel and broke the spot welds on the battery that connected it to the rest of the circuit board.



4) Once I had the battery out I looked at it and took the model number "a panasonic VL2020 3v" I found the exact same battery on ( VL Lithium Coin Cell Batteries 3V 20mAH 2 PIN VERT )Mouser Electronics - Electronic Component Distributor for $4.73. Once I got the battery is was a simple matter of soldering the new one in and making sure everything fit back together.


5) Before I glued it up I rubber banded the thing together and went out to my car to see if I could program it.

Put the working key in the ignition. Turn to position 2 for like 1 second then back and remove the key.

Press and hold the "unlock" button then press the "lock" button 3 times, you should hear all the locks cycle through.

Now take the non working key and press and hold the "unlock" button then press the "lock" button 3 times.

Then turn the ignition on and off again to end the programming....

I took the car for a drive to charge up the battery. Once I was certain it was all working I glued up the key again with some super glue....

Here is a pic of the key being glued.( I used liquid glue)



6) While definitely not a hard or complicated "DIY" project I did save myself about $200 and had fun while doing it...

Sponsored Links

 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 01:35 PM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.